surface of position
英 [ˈsɜːfɪs ɒv pəˈzɪʃn]
美 [ˈsɜːrfɪs əv pəˈzɪʃn]
网络 位置面
双语例句
- In optics polishing process, the active lap can reshape the profile for fitting the surface of large optical component with different local position and rotating angle in real time.
能动磨盘在光学抛光时随磨盘移动位置和旋转角度不同而产生不同的变形以实时与大口径被抛光工件表面实现良好的吻合。 - Notice that Michael's torso right high on the surface of the water, his head is carrying a neutral position with flat leg.
注意到小菲的躯干保持在水面上，他的头部保持一个中间位置（不抬头，也不低头？） - Optimization of Reflection Loss on the Surface of Position-sensitive Detector
位敏探测器表面反射损耗的优化 - Iteration algorithm of surface fitting in the detection of light-spot position
光点定位中的曲面拟合迭代算法 - Direct Observation of the Assembling Structure of Nitrobenzene on the Surface of Graphite and Determination of the Nitro Group Position
硝基苯及其衍生物在石墨表面的组装结构和硝基位置的确定 - The problem of the selection of parting surface of rubber mold, position of mold, mold ma-terial and shrinkage are described separately.
分别阐述了如何选取橡胶模具的分型面、模具的定位、模具材质和收缩率的问题。 - Methods High-frequency probe of intraoperative ultrasound was put on the surface of the liver to determine the position of stones and under ultrasound guidance to surgically take out the lithes from intrahepatic bile ducts.
方法术中超声将高频探头放置在肝表面，利用探针对肝内胆管结石准确定位，并在超声引导下经肝表面切开肝管取石。 - Application this method of search slide surface of slope, the different slope parameters to effect of the position of dangerous slide surface and safety factory have been discussed.
应用这种搜索边坡滑动面的方法讨论了不同参数对边坡滑动面位置及安全系数的影响。 - Effect of molecular weight of gelatine on surface quality of copper electrode position
明胶分子量对阴极电铜表面质量的影响 - Over the past eight years the subject of 3D surface metrology has developed from something of a novelty to a position where it has now become a crucial tool in the characterisation of engineering surfaces across a broad range of applications.
在过去八年里，三维表面测量已经由一个新鲜事物发展成为评估工程表面特性的重要依据，并得到广泛应用。 - The position in the deep surface of the digastric muscle is the hightest position for cuting the accessory nerve.
二腹肌后腹深面为高位结扎切断副神经点，若再向上易伤颈内静脉。 - A detection and three-dimensional reconstruction system for the interior surface of small-diameter pipes was presented based on Position Sensitive Detector ( PSD) and optical triangulation principle.
基于位置传感器PSD和光学三角原理，开发了一种适于空间曲线型微细管孔内表面三维重构的检测系统。 - The result shows that the two rotor models do not have great difference in the stress of outer surface, but have great difference in the stress of central position.
计算结果表明，两个转子模型的外表面应力差异不大，但中心部位的应力相差较大。 - The data of the induced TL peak temperature and peak width of the surface samples were higher than those of the deeper position samples, indicating that the TL phosphor mineral of ordinary chondrites showed obviously ordering-disordering conversion during cosmic ray exposure of the parent body.
诱导热释光数据表明，母体表面部分的样品的峰温和峰宽高于较深部位样品，说明这些样品中发光体矿物由有序态向无序态转化趋势明显。 - Sensorless Control for Surface Permanent Magnet Synchronous Motor and Detection of Initial Position
贴面式永磁同步电机无传感器控制及初始位置检测 - The small continuous wave output of an acoustic-optical Q-switched YAG laser is used as the photo source of the measuring device. And it converge to faculae and to be projected onto the photosensitive surface of the PSD ( Position Sensitive Detector) by the triangulation device.
该系统以声光调QYAG连续激光作为测量光源，采用光学三角测量装置将光斑投射到光电位置传感器PSD上，将待加工表面相对指定位置的偏移反映为光斑在PSD上的位置变化。 - Noise attenuation section should be in place where is wide, relatively light discrepancy in elevation, and where the earth's surface vegetation of present position is representative.
噪声衰减断面应选在开阔、高差较小的地方，所处位置地表植被具有代表性。 - Through computing the reflectance of antireflective coatings combined with single SiO 2 or SiO 2 and Si 3N 4 on the surface of position sensitive detector for different wavelength, the optimum data can be obtained.
本文通过计算SiO2单层以及SiO2和Si3N4组成的双层减反膜对不同波长的反射率，给出了位敏探测器表面反射损耗的优化。 - Results The complete showing rate of anterior cruciate ligament ( ACL) in the vertical and inclined sagittal surface of extending position was 63.3% and 70.0%;
结果30例膝关节前交叉韧带（ACL）在伸直位垂直、斜矢状面完整显示率分别为63.3%、70.0%； - Techniques of Reflector Surface Fitting and Evaluation of Radar Antenna Located at Arbitrary Position in Space
任意空间位置雷达天线反射面拟合与评定技术 - Analyse and Discuss about Profile Tolerance of Any Line and Profile Tolerance of Any Surface of Tolerances of Form and Position
对形位公差中线、面轮廓度的探讨 - The STM image of Si ( 100) surface showed the existence of many defects. The position of the defects could be determined from the STM image with positive or negative sample bias in the same area.
Si（100）面的STM像存在许多缺陷，缺陷位置能从在同一区域样品上加正负偏压的STM像来确定。 - Secondly, the key technology of how to align point cloud with surface feature model of human body, analyze error, adjust position are researched and the algorithms of calculating center of mass, inertia axis, and symmetry plane are successfully introduced.
其次，研究了如何将测量得到的人体点云数据与人体曲面特征模型对齐，进行误差分析，位置调整等关键技术，成功的将质心、惯性轴、对称面的计算方法引入到对齐过程中。 - As a kind of non-contact measuring method, Laser radar can obtain the three dimensional coordinate of an object surface with scan data of each position, distance and angle, to carry out the scan technology of extracting the surface information and its reconstruction.
激光雷达采用一种非接触式的测量方式，它是通过位置、距离和角度等观测数据直接获取对象表面点的三维坐标，实现曲面信息提取和曲面重建的扫描技术。 - In the process of industrial products manufacturing, the surface defect detection of the product has been occupying the main position of product quality detection.
工业生产过程中，产品的表面缺陷检测一直占据着产品的质量检测的重要地位。 - The proposed method approximates a 3-D region by a parametric surface which is rational Gaussian surfaces. The user can edit the surface shape by changed the parameters of the position of control points.
本方法利用参数化曲面逼近三维区域，这里的参数化曲面是指有理高斯曲面，通过修改生成参数化曲面的控制点位置，编辑曲面形状，从而完成辅助分割的功能。 - Under the standard view of passives, the surface subject of a passive is base-generated in the postverbal object position at D-structure.
标准的被动结构分析认为，被动句的表层主语在深层结构中是在动词后面的宾语位置上基础生成。 - This method can generate dynamic spherical surface multi-resolution grid according to the change of viewpoint position and direction, moreover, can transit between the different levels of detail continuously. 3.
该方法根据视点位置和方向的变化动态生成球面多分辨率网格，实现了不同细节之间的平滑过渡。 - A video surveillance image can be represented by a 3-D surface of the colour intensity of each pixel position. The spatial distribution of the surface reflects the feature of image texture and it usually appears to be a fractal.
视频监控图像可以表示为以像素位置及对应颜色强度构成的三维空间曲面，其空间分布特点反映了图像纹理的特点，在大多数情况下具有分形特征。 - Surface of cone and cylinder with perpendicular axes is used as the docking surface, so as the orientation of pose& position of the tool in 6 DOF is achieved.
对接曲面采取了轴线相互垂直的圆锥体和圆柱体，实现对工具的六自由度定位定姿。